SMD LED mai sassauƙan tsiri SMD2835 LED STRIP LIGHT(12V/24V)
Siffofin
Kwamitin PCB mai sassauƙa, nau'ikan hana ruwa iri-iri don mahalli daban-daban;
5 merters a kowace reel, yanke ta ƙayyadadden tsayi;
Sauƙi don shigarwa da kulawa, Wide applicable;
Matuƙar Haske, tare da kusurwar kallo 120;
Ajiye makamashi da kiyaye muhalli, tsawon rai;
Ƙananan ƙarfin aiki (DC12V/DC24V) don amincin ɗan adam, akwai launuka daban-daban.
Aikace-aikace
Hasken kayan ado na cikin gida da waje don otal, akwatin haske na talla, KTV, da sauransu;
Fassarar shimfidar wuri, wuraren zama ko jama'a;
Alamomin talla, akwatunan haske;
LED Linear Lighting;
Hasken hallway na gaggawa;
Hasken kayan ado na gine-gine;
Ginin kwane-kwane hasken wuta;
Lissafin LED Fixture; LED Retail Lighting;
Hasken kayan ado na mota da babur;
Babban sikelin baya haske Hasken nunin taga;
LED Lighting; Nunin Hasken LED; LED Museum Lighting;
LED Kitchen Lighting; Nuna Hasken LED; Fasaha LED Lighting;
Fitilar kayan ado na hutu, nuni da hasken nuni;
Girma
Siga
| LED irin | 2835 | |||
| Bangaren No. | Saukewa: HXD2835-60 | Saukewa: HXD2835-120 | Saukewa: HXD2835-180 | Saukewa: HXD2835-240 |
| Wutar lantarki | 12/24V | |||
| LEDs/m | 60 | 120 | 180 | 240 |
| Watts/m | ≤4.8W/M | ≤9.6W/M | ≤14.4W/M | ≤19.2W/M |
| Tsawon Gudu | 5/10m/mita | |||
| CCT | WW/NW/CW/Ja/Kore/Blue/Yellow/Gold/Janairu/Orange | |||
| IP Rating | IP20/IP65/IP68 | |||
Na'urorin haɗi
Mai hana ruwa DC haši
Masu haɗawa (don tsiri mara ruwa)
waya mai hana ruwa haɗi
Silicon shirye-shiryen bidiyo na IP65
Silicon shirye-shiryen bidiyo na IP20
Ƙarshen hula
Jagoran aiki (Ba mai hana ruwa ba)
1. Yanke igiyoyin haske a alamar "almakashi"
2. Sanya PCB a cikin sarari tsakanin shirin bidiyo da mai haɗawa, sanya shirye-shiryen bidiyo daidai da nufin wurin walda.
3. Rufe murfin mai haɗawa
4. Sanya PCB a cikin sarari tsakanin shirin da mai haɗawa, sanya shirye-shiryen biyu daidai da nufin wurin walda.
5.Rufe murfin mai haɗawa
Jagoran aiki (mai hana ruwa ruwa)
- Yanke filayen haske a alamar" almakashi".ko kowane 3 ledoji
- Bude hular siliconglue kuma allurar gel siliki a cikin tafkin karshen ba tare da ramuka ba
- Tura raƙuman a cikin hular ƙarshen kuma bari gel ɗin silicon ya bushe don 1 hour
- Saka waya mai haɗawa ta cikin ramukan hular ƙarshen
- Sayar da waya akan PCB
- Bayan an sayar da wayoyi guda biyu daidai, tura igiyoyin a cikin murfin ƙarshen tare da wayoyi a hankali
- Yi allurar gel ɗin silicon a ƙarshen hular
- Tabbatar an haɗa hular ƙarshen da tsiri da kyau kuma bari gel silicon ya bushe na awa 1
Zane Haɗin
tushen wutan lantarki
Lura: Ƙarƙashin amfani, shawarar wutar lantarki zata kasance 20% girma fiye da wutar lantarki Max tsiri don tabbatar da daidaiton haske da kyakkyawan aikin samar da wutar lantarki na tsawon lokaci.
Lura
1.Don Allah a yi amfani da samfuran ƙimar IP daban-daban bisa ga yanayin muhalli daban-daban;
2.Notice babu lalacewa ga da'irar PCB a ƙarƙashin shigarwa;
3.Adopt dacewa da wutar lantarki don dacewa da igiyoyin jagoranci. Ƙarfin yana da 20% girma fiye da max.power na ragamar jagorancin don tabbatar da tsawon lokacin aikin samar da wutar lantarki;
4.Hana shigar da shi lokacin kunna wuta. kafin kunnawa, da fatan za a tabbatar cewa wayoyi daidai ne da zarar an gama shigarwa;
5.Don samun mafi kyawun tasirin haske kuma babu lalacewa. Max.tsawon ci gaba shine mita 15;
6.Don Allah kada ku kalli hasken na dogon lokaci lokacin da yake aiki don kare idanunku;
7. ƙwararrun ma'aikata kawai na iya rushewa da gyarawa.
